Tools for 33mm water taps

Here you will find a tool to more easily access and loosen & tighten the nut to your faucet. When it is tight and awkward to access by hand, this helps you to access much easier by acting as an extender. Works for both short and long connections on the faucet. see pictures. It is possible to turn the tool to change the dimension of the hole away from the tap for the short connections. Only fits plastic nut for 33mm taps. (33mm mounting hole) Instructions: 1. Detach all hoses and electrical cables from your crane 2. Pass hoses & electrical cables through the tool. 3. Place the tool so that the nut jumps "in place" in the tool. 3.2 If you have short hose connections on your crane, make sure that these point out of the hole in the tool. You can then turn a bit then reposition the tool. 4. Tighten / loosen the nut. Note make sure there is no pipe or similar so the tool does not fit before you buy it. Dimensions: Inside: 38mm Outside: 45mm Height: 85mm Tool for 33mm water taps